|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Material: | PTFE+Elastomer |
| Application: | Cylinder |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The GSZ5 dust seal is a type of double-lip dust-proof ring that consists of a wearing ring with sealing and dust-proof cutting edges, along with an O-ring that acts as a pre-tightening element. It is specifically designed for use in challenging environments characterized by severe dust, intense cold, and high-frequency reciprocating motion. The GSZ dust seal finds its primary application in hydraulic and pneumatic devices, servo systems, as well as equipment used in the chemical and food industries. Its main function is to provide effective sealing and prevent the ingress of dust and contaminants, ensuring the reliable operation and longevity of the systems it is employed in.
| Code | Fucntion | Limited Condition | ||
| Pressure (MPa) | Speed (m/s) | Temp. (ºC) | ||
| SPGO | Piston Seals (Double Acting) |
40 | 5 | -45ºC +200ºC |
| SPG | Piston Seals (Double Acting) |
35 | 1.5 | -30ºC +200ºC |
| SPGW | Piston Seals (Double Acting) |
50 | 1.5 | -45ºC +200ºC |
| GSD | Piston Seals (Single Acting) |
40 | 5 | -30ºC +200ºC |
| DAQ | Piston Seals (Double Acting) |
40 | 2 | -30ºC +200ºC |
| AQ5 | Piston Seals (Double Acting) |
40 | 2 | -30ºC +200ºC |
| DAS | Piston Seals (Double Acting) |
40 | 0.5 | -30ºC +100ºC |
| PG | Piston Seals (Double Acting) |
35 | 0.5 | -30ºC +100ºC |
| MPA | Rod Seals (Single Acting) |
40 | 0.5 | -45ºC +120ºC |
| MPB | Rod Seals (Single Acting) |
40 | 0.5 | -45ºC +120ºC |
| MPR | Rod Seals (Single Acting) |
40 | 0.5 | -45ºC +120ºC |
| MPS | Rod Seals (Single Acting) |
40 | 0.5 | -45ºC +120ºC |
| HBY | Rod Seals (Single Acting) |
40 | 0.5 | -30ºC +110ºC |
| HBTS | Rod Seals (Single Acting) |
40 | 3 | -30ºC +110ºC |
| GSJ | Rod Seals (Single Acting) |
40 | 3 | -30ºC +110ºC |
| GSI | Rod Seals (Double Acting) |
40 | 5 | -45ºC +200ºC |
| DH-5 | Dust Sels | 2 | -40ºC +110ºC |
|
| DHS | Dust Sels | 2 | -40ºC +110ºC |
|
| GSZ5 | Dust Sels | 5 | -40ºC +110ºC |
|
| DKBI | Dust Sels | 3 | -30ºC +100ºC |
|
| DKBZ | Dust Sels | 3 | -30ºC +100ºC |
|
| RVA | Rod Var i Seals | 45 | 15 | -70ºC +260ºC |
| GRS | Rotary Rod Seals | 30 | 1 | -30ºC +200ºC |
| ROI | Rotary Rod Seals | 28 | 0.3 | -30ºC +100ºC |
| BRT | Rod Seal Backup rings |
1 | -45ºC +200ºC |
|
| N4W | Piston Backup rings |
1 | -45ºC +120ºC |
|
| KZT | Dust Rings | 5 | -45ºC +200ºC |
|
| WR | Wear Rings | 1 | -45ºC +120ºC |
|
| RYT | Guide Tape | 5 | -45ºC +200ºC |
|
| Sealing Component Storage Guidelines and Recommend-ed Shelf Life | |
| Storage Recommendations: | |
| Stock Control | Follow the First- In-First-Out (FIFO) princip le |
| Optimal Temp. | Seals should be kept aw ay from heat sources like direct sunlight and heat-emitting objects . The maximum storage temperature is +32°C. Low temperatures w on't cause permanent damage to the seals but can make them brittle, leading to potential breakage if mishandled. Generally , the storage temperature for seals should not go below +10°C, and they should be brought to room temperature before installation. |
| Avoid strong light |
Surfaces should be shielded from direct sunlight and artificial light sources to prevent exposure to ultraviolet radiation. |
| Moisture control |
Special care should be taken during storage, and the ambient humidity should not exceed 65% . Some specific polyurethane seals that are sensitive to moisture should be stored in sealed containers |
| Keep away from oxygen and ozone |
Ozone and oxygen are harmful to seals . Seals should be stored in sealed containers . Any equipment that generates sparks should be kept aw ay from the storage containers . |
| Keep away from |
For seals to have a longer storage life, they should be kept aw ay from contaminants . The w arehouse should be kept clean. |
| Avoid distortion |
Large seals should be stored flat instead of hanging, as prolonged hanging can cause distortion. Seals should not be placed on hooks , nails , or metal plates . |
| Recommended Shelf Life : | |
| Compounds | Shelf Life |
| FEPM | 7 Years |
| EP,EPR,EPDM | 7 Years |
| FKM | 7 Years |
| NBR,HNBR,XNBR | 7 Years |
| AU or EU | 10 Years |
| TPCE | 10 Years |
| PTFE | Unlimited |
){kind=link}